Wtmx-600L Multifunction Dispersing Mixer Silicone Sealant Mixer

I.Utility
Multifunctional Dispersing and Mixing Machine is a kind of equipment mixing powerfully at high and low speed. It is applicable for mixing, reacting, dissolving, dispersing solid-liquid, liquid-liquid material in the fields of chemical industry, light industry, food industry, pharmaceutical industry, construction material industry, pesticides industry etc. such as making mucilage glue, silicon-keton sealing glue, polyurethane glue, acrylic plastic, automible sealing glue, encapsulation glue, ointment and paste material, lubricating grease and paint, paste cosmetic, ink and paint emulsion, paste food and additive etc.

II. Working Principle, Structure and Attribute
The machine applies special mixing structure: material basket is fixed, in the middle mixing blade pushes bottom material up and wall material toward the center with grinding wall and moving at low speed. In the two sides are high speed dispersing and mixing devices that break up and disperse material promptly, their speed is adjustable, so that material can be fully compounded by means of dispersing and mixing machine moving at high and low speed and strongly trimming and nipping together. The machine is mechanical sealing so that air bubble can be pumped out.
The machine consists of high-low speed motor, reducer, transmission case, hydraulic pole, bearing mount, top cover, material basket, base, electronic control case and hydraulic station. Transmission case can move up and down after being driven by hydraulic pole. Basket can be moved because there are wheels under it.

III. Technical Data:

1.Power supply: three-phase ac 380V;50Hz.

2.Total motor power:62Kw.

3.Design volume:600L.

4.Main material: the part in contact with the material is stainless steel SUS304.

5.Frame structure: gantry type double column hydraulic lifting structure, upper rear word type transmission box, built-in bearing seat, inclined seal cover, lower barrel, barrel positioner and base, and barrel internal card positioning.

6.Low-speed stirring: shan-type with two wall scraping and two bottom scraping device, material: SUS304, with F4 scraper.

7.Low-speed power and configuration: motor power: 15kw-6p; Supporting cycloid reducer; Impregnated synthetic wear - resistant mechanical seal, imported heavy - duty double bearing, mixing shaft speed of 3 ~ 33 RPM (frequency control).

8.High-speed stirring: the lower part is a high-tooth dispersing disk, and the upper part is a three-blade high-efficiency butterfly paddle (slideway design, adjustable layer spacing).

9.Double high-speed power and configuration: motor power: 2 sets of 22 kw-6p (with frequency conversion speed regulation), heavy-duty pulley drive, double-layer silicon synthetic wear-resistant high-speed mechanical seal, imported heavy-duty double bearing, mixing shaft speed of 100 ~ 1000 RPM.

10.Cover structure: inclined cover type, dovetail slot type with d-shaped special rubber ring, belt and barrel positioning inside ring bayonet (patent).

11.Cover lifting method: gantry type double-column hydraulic, lifting stroke: 880mm; Set up the stroke control.

12.Barrel vacuum:-0.095Mpa.

13.Block hole: Ф with endoscopic loading port 200 (before); (front right, with interlock protection), (front right), (front right), (front right), (front right), (front right), (front right), (front right), (front right). DN100 observation port (rear right, low voltage lamp), M27 2 digital display temperature measurement port (rear middle).

14.Ф VAT details: the net size 1000 x 800, flange, the internal barrel wall and bottom of large vertical lathe machining fine buffing after processing, inside the barrel material: SUS304, increase the cooling jacket, the built-in guiding device, access interfaces for G1 "silk, material: SUS304. ZG3 "no stowage quick lower discharge port, 4 6-inch American auburn heavy duty casters at the bottom, push positioning with barrel at the middle of the bottom.

15.Description of electrical control cabinet: 3 sets of wuxi eckert vector frequency converters are built in, and the master switch is set; Control: low speed motor, reducer oil pump motor, high speed dispersion motor, hydraulic station motor, solenoid valve; Low pressure observation lamp with mirror mouth; The rising is controlled by stroke, and the cabinet is equipped with air cooling device, ammeter, voltmeter, emergency stop and digital display of materials in the kettle (0 ~ 1000C); Another set of 7.5Kw motor control (controllable vacuum pump).

16.Security interlock description:A. Only after the sealing cap is lowered in place, can stirring be started. B. Under the state of stirring, the sealing cover does not rise. C. After rising, stirring does not work. D. Cover lifting and lifting are controlled by adjustable stroke and stop automatically when in place. E. The vacuum vent valve does not open and the rising valve does not work. F. Grounding screws are provided in the mixer, control cabinet and hydraulic station, and the user must be grounded reliably.

17.Other instructions: two drums per mixer (excluding vacuum pump).

18.Main equipment outline size mm: 2250×1250×2950 (static); Electric control box dimensions: 1000 420 1700, hydraulic station:600×450×800.

19.Equipment weight Kg:4500

20.Description of accessories: 1 spare silicone ring, 2 spare original casters, 4 rubber rings at the discharge port, 2 sealing rings at the feeding port, operation manual, certificate of qualification and delivery list.